EZ Step 1 Tool polished concrete

EZ Step 1 Tool polished concreteUse Tool #1 in conjunction with the EZ Green Cut. This can follow any metal bond such as 16 20, or 30 40 grit depending on the aggregate exposure desired. Once the floor is prepped with the proper metal bonds, proceed to Tool #1. INSTRUCTIONS 1) Saturate surface with water and keep the floor wet. 2) Apply EZ Green Cut to the wet floor and begin grinding with Tool #1. 3) Keep the slurry in front of the grinding path. The slurry should be of the

labor costs

It is designed to create stain resistance

4) Allow first coat to dry 4 hours

and makes a great topcoat over stains

2) Apply a thin coat to the floor using a metal finishing trowel

Can be used as part of a full flood wet process or as a mist in dry grinding

Small Holes:

Spread rate is highly dependent on surface roughness and porosity

EZ Grouting System has a part A and part B

The EZ Grouting System is designed for repairing damaged control joints

1) Spray a light mist of Super Sealer Plus onto the surface and immediately spread evenly with a microfiber pad

Product Size: 1 Gallon