80-97 2WD F250 / F350 4" Lift (BOLT ON) Front Only Steering

80-97 2WD F250 / F350 4" Lift (BOLT ON) Front Only SteeringBy popular demand! Finally a 2WD lift kit for the F 250 F 350 platform Designed for the performance driven enthusiast, this 4" front lift kit offers a fully bolt on solution for your 2WD F 250 or F 350. This kit will lift the front end for increased clearance and improved stance needed when fitting a tire larger than stock size. Utilizing the same extended radius arms as other Desolate Motorsports suspension kits, both steel and billet options provide

Our steering kits are all TIG welded and use 1

The engine cross over

Brackets are 2

the headlight switch mounting holes are notorious for this

they fit  Broncos and F-Series trucks in the 80s & 90s with the power mirrors from factory (5 3/4" center hole to center hole spread) by locating off two factory holes on the door while the third hole must be drilled (make sure window is rolled up before drilling

extra shipping charges will apply based on your geographical location

Slide the steering box universal joint over the splined steering box input shaft by extending the telescoping shaft to the depth shown in Figure B

Frame Brackets

Sway Bar Frame Brackets

Retains all factory mounting hardware

there are some earlier ( 89-91) trucks that also have the proportioning T style fitting on the driver side

THESE WILL ONLY FIT 1985-1997 FORD AXLES