Bonnet Risers (Use Drop Down Box Below)The SGA bonnet risers are available in three heights, for 1, 2 and 3 openings along both sides of the bottom of the bonnet. If your car does not have either louvers or doors, and particularly if it still has its belly pans on it, you will likely need a set of these for hot weather touring. As you might imagine, the 3 rise is the most effective. It does, however, cause the front of the bonnet to be noticeably above the radiator. The 2 is the most
High strength aluminum blades designed for use with the SGA fan hub above
for tasks like repainting the blocks
It's useful for troubleshooting the MSD unit and it's wiring and for switching it back to Kettering so your ignition scope trace will look 'normal' for the easiest trouble shooting
” and that may be all that is wrong
a special tee and pipe assembly that replaces the 'S pipe' near the extra oil valve
The material measures 3/16" x 2-1/4" x 36" and has been specially sourced by the SGA tech folks
This is a special fuse block specifically located for early Ghosts that didn't have much of an electrical system or in many cases
or from a separate 5 volt battery (available separately) or other power source
Thirty-two sections
It is very commonly used in industrial gearboxes
braze or weld to 1/2" schedule 40 black iron pipe (available locally or below)
Change them out to these socket head cap screws and use the included tee handle ball end Allen wrench and that inconvenience is gone
