Steering Box Oil and Moly, 1 Gallon Jug

Steering Box Oil and Moly, 1 Gallon JugTexaco Vanguard1000 steam cylinder oil plus 5% Dow Corning Molykote M molybdenum disulphide. SGA tech folks brew this one up to save you the trouble, but like the 600 wt. oil, you can get the materials locally and do it yourself if it is more convenient. The moly additive will be found at power transmission houses i. e. bearing stores, not at oil companies. Because the steering box is a screw and nut, it is best lubricated with oil. Anything that will

and increased the strength accordingly

We already have some data

special alloy screws

cause the front of the bonnet to be noticeably above the radiator

This is the same unit that is in the SGA faux Westinghouse unit above

This allows you to hear the engine starting without interference from the device

and a high volume annunciator

Mag index holes might be right or you may have to provide others to match your mag

This unit provides special power for the Bezel light units

Three are used per side on most cars -- very early LHD Springfield's used only two plus a flattened flange in the place of the third at the crossmember location

sometimes from just changing the oil

It is mounted on the back side of the panel with hinges so it can hinge up and out of sight