ABS Filament Adhesive

ABS Filament AdhesiveABS (Acrylonitrile Butadiene Styrene) Filament ABS (Acrylonitrile butadiene styrene) is one of the most used materials in the plastics industry and gained a lot of popularity within the 3D printing sector due to the ease of processability and great mechanical properties. This ABS filament is a strong material with a high toughness, high impact resistance and is also light and durable. After the print is done you can easily post process the object by

05mm 95% 2

27 g/cc ISO 1183 Tensile strength at yield 50 MPa

853 certified

000 h) 170 °C IEC 60216 Surface resistance (ROB) >10¹² Ω DIN IEC 60093 Insulation resistance strip electrode (R25) >10¹²  Ω DIN IEC 60167

of Facilan™ PCL100 it can be reshaped after 3D printing in water with a temperature of 55 °C

Description Value Printer nozzle temperature 350 - 380°C Heated bed temperature 120 - 160°C Adhesion Magigoo HT on glass or a PEI Sheet Drying recommendations 120°C

PEKK has a higher Tg than PEEK of 15ᵒC

25 g/cm³ ISO 1183-3 Tensile  strength (at 23°C/50% rh) 78 MPa ISO 527 Elongation at maximum force 4

PEKK Filament is easier to print than regular PEEK filament with a better layer adhesion

05mm 99% 2

ASA parts have good chemical and heat resistance

120 °C IEC 60216 Maximum (short term) Use Temp