GSC Power-Division Stainless Steel Intake Valves +1mm - Subaru Models (inc. 2002-2014 WRX / 2004-2021 STI) PDM_cam-gears

GSC Power-Division Stainless Steel Intake Valves +1mm - Subaru Models (inc. 2002-2014 WRX / 2004-2021 STI) PDM_cam-gearsHIGHLIGHTS: Stronger stainless steel construction +1mm oversize Complete set for the intake side GSC Power Division Stainless Steel Intake Valves +1mm SPECS: Swirl polished heads for smoother air flow over the valve Back cut to reduce valve weight for higher rpm, higher boost pressure, and allow for more aggressive cam profiles without increasing valve spring seat pressures Valve stems are micro polished to allow for less oil retention on the stem

Removal of the rotor dust shield is highly recommended in aiding air flow to the brakes

With a size of 18x9

The end plates used are aerodynamically tuned to ensure a consistent airflow across the airfoil

The Planted Steel Offset Universal Side Mount is made from 1/8th inch thick steel which complies with FIA's required thickness

and install the Getadomtune Cylinder 4 Chamber Cooling System

Interfaces with the factory hard lines near the LH strut tower using SAE quick-connects or older hose barb connections

These are designed to replace the OEM rubber bushings

these will provide the exterior with race-inspired looks

if you decide at a later date to turn it up

The mounts feature 75 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration

Provides a strong leak-free seal

The front and rear top hats are camber adjustable