Ceramic Fiber Blanket oil switch

Ceramic Fiber Blanket oil switchThe Ceramic Fiber Blanket helps to create a hotter combustion chamber. The top surface of it glows red hot with fire passing over the top of it. This extremely hot surface also helps to burn off spit and sputter from contaminants. It simply lays in the bottom of the boiler's first pass with the front edge flush with the front edge of the boiler. Also available is a stainless steel sleeve and a stainless steel combustion chamber if the ceramic blanket

rolled steel welded coils

SKU : 90115

All parts can be ordered individually or in an assembly as shown

designed to mix the air and fuel

The DTC provides a LED read-out showing the current temperature and the set-points which can be easily changed to accommodate heavy oil

Expansion Tank

There are three models recommended: Model D-3 for BTU sizes up to 300K

a lid that provides vapor separation

Horizontal Tanks also available that support the smaller boilers: 53 Gallons and 79 Gallons with continuous flow rating of 124 and 182 GPH respectively

This switch senses when pressure builds in the oil circuitry indicating the vapor eliminator filter requires changing

INOV8 will install this DTC during burner reconditioning or will send a kit with instructions for those with machining capabilities

When the needle is in the green area on the gauge