Pulsar Turbo Systems - 6255G 900HP 62mm Dual Ball Bearing Turbo Silicone

Pulsar Turbo Systems - 6255G 900HP 62mm Dual Ball Bearing Turbo SiliconeDual ceramic ball bearing system provides optimal turbo response &better durability by reducing the shaft motion 9 Blade PTG Aero billet compressor wheel with extended tapered tip technology 9 Blade PTG Aero Inconel 713c turbine wheel Anti Surge ported shroud compressor inlet, cover integrated with the speed sensor port Compressor Wheel: 62*76mm Turbine Wheel: 60*55mm Compressor Inlet: 4 Hose Compressor Outlet: 2 Hose Turbine Inlet: T3 or T4 Turbine

this makes cruises difficult and you don't want to go on a two hour cruise only to arrive at a service station that usually has E85 but for some reason is either closed/out of fuel (nightmare scenario)

PURPLE - if no colour is written down we will send out a black wastegate

- ms or duty cycle dwell mode

Open Exposed Glass Element

Suits: Haltech iC-7 Dash

Compressor Inlet: 5” Slip-Fit

Middle or End Injection Definable

Its cutting edge dual-chamber design means it can be held open with the use of a solenoid to aid turbo response and control during staging to give the best possible launch

Most commonly paired with Bosch Fuel Injectors

1000-1300+ hp rated Competition-Spec intercooler

NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping

This is the PERFECT match to our NPC Clutch Kits which you can find HERE