Vacuum Gauge - 30 psig Love sensorThe Vacuum Gauge indicates when the Strainer Filter is getting clogged, and needs to be cleaned. When the needle is in the green area on the gauge, the Strainer is operational. When the needle reaches the yellow to red area, the filter in the strainer must be removed and cleaned. SKU : 90115
That is the assembly that contains most of the small components and oil delivery that requires cleaning and possibly replacing
This Suntec Pump is specially modified and cannot be replaced without getting it from INOV8
They differ by the spring inside which adjusts the pump pressure
The DTC work with the Temperature Probe Sensor
one for the smaller G115 boiler and one for the larger G215 & G315 boilers
The 30609-5 is used on the larger waste oil burners
p/n 50166 and 50165
locknut and air pressure gauge (which is 160 psig)
Also available is a stainless steel sleeve and a stainless steel combustion chamber if the ceramic blanket is not working adequately
but the two larger door insulations must be shipped via freight at estimated costs of $320 - depending on location
The top surface of it glows red hot with fire passing over the top of it
The Digital Temperature Controller (DTC) senses the oil preheat temperature for two control levels: interlock (to assure the oil is at optimal combustion temperature and the high temperature which maintains that temperature within a few degrees
